diff options
| author |  Jagan Teki <jagannadh.teki@gmail.com> | 2018-01-30 13:03:53 +0100 |
|---|---|---|
| committer |  Peter Korsgaard <peter@korsgaard.com> | 2018-02-06 11:39:48 +0100 |
| commit | cdbb96e0b189ce7a270979993422b9780a3a6224 (patch) | |
| tree | 8e13bb3cf6ce14b1125cce5085b4f751b8ac6cdc /board/amarula | |
| parent | 30daaed1935004661cf54d90dc361a3f1d9d509c (diff) | |
| download | buildroot-cdbb96e0b189ce7a270979993422b9780a3a6224.tar.gz buildroot-cdbb96e0b189ce7a270979993422b9780a3a6224.tar.bz2 | |
board: Add Vyasa RK3288 board support
Add Vyasa board, from rk3288 family SOC.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board/amarula')
| -rw-r--r-- | board/amarula/vyasa/extlinux.conf | 4 | ||||
| -rw-r--r-- | board/amarula/vyasa/genimage.cfg | 21 | ||||
| -rw-r--r-- | board/amarula/vyasa/linux_gmac.fragment | 3 | ||||
| -rwxr-xr-x | board/amarula/vyasa/post-build.sh | 9 | ||||
| -rw-r--r-- | board/amarula/vyasa/readme.txt | 31 |
5 files changed, 68 insertions, 0 deletions
diff --git a/board/amarula/vyasa/extlinux.conf b/board/amarula/vyasa/extlinux.conf new file mode 100644 index 0000000000..a8fcc35f5a --- /dev/null +++ b/board/amarula/vyasa/extlinux.conf @@ -0,0 +1,4 @@ +label Vyasa linux-next + kernel /boot/uImage + devicetree /boot/rk3288-vyasa.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait diff --git a/board/amarula/vyasa/genimage.cfg b/board/amarula/vyasa/genimage.cfg new file mode 100644 index 0000000000..fa41de3672 --- /dev/null +++ b/board/amarula/vyasa/genimage.cfg @@ -0,0 +1,21 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/amarula/vyasa/linux_gmac.fragment b/board/amarula/vyasa/linux_gmac.fragment new file mode 100644 index 0000000000..8ebf383597 --- /dev/null +++ b/board/amarula/vyasa/linux_gmac.fragment @@ -0,0 +1,3 @@ +# Currently mainline kernel exhibits issues when running rockchip gmac +# on the board, so enable it as loadable module and insert it later +CONFIG_DWMAC_ROCKCHIP=m diff --git a/board/amarula/vyasa/post-build.sh b/board/amarula/vyasa/post-build.sh new file mode 100755 index 0000000000..ffbbcdeb58 --- /dev/null +++ b/board/amarula/vyasa/post-build.sh @@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img +cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/amarula/vyasa/readme.txt b/board/amarula/vyasa/readme.txt new file mode 100644 index 0000000000..b95889e814 --- /dev/null +++ b/board/amarula/vyasa/readme.txt @@ -0,0 +1,31 @@ +Vyasa RK3288 +============ + +Vyasa is RK3288 based Single board computer with fully supported opensource software. + +https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288 + +How to build it +=============== + + $ make amarula_vyasa_rk3288_defconfig + +Then you can edit the build options using + + $ make menuconfig + +Compile all and build rootfs image: + + $ make + +Prepare your SDCard +=================== + +Buildroot generates a ready-to-use SD card image that you can flash directly to +the card. The image will be in output/images/sdcard.img. +You can write this image directly to an SD card device (i.e. /dev/xxx): + + $ sudo dd if=output/images/sdcard.img of=/dev/xxx + $ sudo sync + +Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it. |