path: root/board/freescale
diff options
authorGravatar Matt Weber <matthew.weber@rockwellcollins.com>2018-03-04 20:47:00 -0600
committerGravatar Peter Korsgaard <peter@korsgaard.com>2018-03-06 12:01:01 +0100
commit9f13f8c2374e8240c1b85c702257341df80bd797 (patch)
treef520b5a17c47029648dfc188d5a39a9e5b5ed3e8 /board/freescale
parentb0fd706c2fe77157ec9d157568acf535d7d8daca (diff)
freescale_p1010rdb_pa_defconfig: remove board
This defconfig currently doesn't build with GCC6 (Linux 4.1). https://gitlab.com/buildroot.org/buildroot/-/jobs/55306827 A maintainer w/board isn't available to make updates, so removing this config. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board/freescale')
2 files changed, 0 insertions, 110 deletions
diff --git a/board/freescale/p1010rdb/linux-4.1.config b/board/freescale/p1010rdb/linux-4.1.config
deleted file mode 100644
index 2de430cbee..0000000000
--- a/board/freescale/p1010rdb/linux-4.1.config
+++ /dev/null
@@ -1,70 +0,0 @@
diff --git a/board/freescale/p1010rdb/readme.txt b/board/freescale/p1010rdb/readme.txt
deleted file mode 100644
index 025c97e8a8..0000000000
--- a/board/freescale/p1010rdb/readme.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-1. Program the DTB to NOR flash
- => tftp $loadaddr p1010rdb-pa.dtb
- => erase 0xee000000 +$filesize
- => cp.b $loadaddr 0xee000000 $filesize
-2. Program the kernel to NOR flash
- => tftp $loadaddr uImage
- => erase 0xee080000 +$filesize
- => cp.b $loadaddr 0xee080000 $filesize
-3. Program the root filesystem to NOR flash
- => tftp $loadaddr rootfs.jffs2
- => erase 0xee800000 0xeff5ffff
- => cp.b $loadaddr 0xee800000 $filesize
-4. Booting your new system
- => setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000'
- If you want to set this boot option as default:
- => setenv bootcmd 'run norboot'
- => saveenv
- ...or for a single boot:
- => run norboot
- You can login with user "root".