path: root/board/freescale
diff options
authorGravatar Thomas Petazzoni <thomas.petazzoni@bootlin.com>2018-03-04 23:00:39 +0100
committerGravatar Peter Korsgaard <peter@korsgaard.com>2018-03-05 21:30:30 +0100
commitf08dd9f4cbba2b88fe62e68c37e49fba4e3895c9 (patch)
treed82fb2764550b5e9431231b47870b2900c45e121 /board/freescale
parent8cffa8163cd5b275eb962cf435507c1a8bc512a1 (diff)
configs/freescale_mpc8315erdb: remove defconfig
This defconfig currently fails to build the Linux kernel: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306826 In addition, the U-Boot build had already been removed in commit 12c01e4a05c8e4f4e0c4e8b74fac7824efdc8b41 ("configs/freescale_mpc8315erdb: remove U-Boot build"), back in October 2016, and nobody bothered fixing it. This defconfig was originally contributed and maintained by Gustavo Zacarias, but he is no longer active in Buildroot, and nobody expressed interest in this defconfig, so let's get rid of it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board/freescale')
2 files changed, 0 insertions, 110 deletions
diff --git a/board/freescale/mpc8315erdb/linux-4.5.config b/board/freescale/mpc8315erdb/linux-4.5.config
deleted file mode 100644
index 8f56069309..0000000000
--- a/board/freescale/mpc8315erdb/linux-4.5.config
+++ /dev/null
@@ -1,70 +0,0 @@
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PCIEASPM is not set
diff --git a/board/freescale/mpc8315erdb/readme.txt b/board/freescale/mpc8315erdb/readme.txt
deleted file mode 100644
index b4c87b4d4a..0000000000
--- a/board/freescale/mpc8315erdb/readme.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-1. Program the kernel to NAND flash
- => tftp $loadaddr uImage
- => nand erase 0x100000 0x1e0000
- => nand write $loadaddr 0x100000 0x1e0000
-2. Program the DTB to NAND flash
- => tftp $loadaddr mpc8315erdb.dtb
- => nand erase 0x2e0000 0x20000
- => nand write $loadaddr 0x2e0000 0x20000
-3. Program the root filesystem to NAND flash
- => tftp $loadaddr rootfs.jffs2
- => nand erase 0x400000 0x1c00000
- => nand write $loadaddr 0x400000 $filesize
-4. Booting your new system
- => setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr'
- If you want to set this boot option as default:
- => setenv bootcmd 'run nandboot'
- => saveenv
- ...or for a single boot:
- => run nandboot
- You can login with user "root".