path: root/board/zynqmp/post-image.sh
diff options
authorGravatar Luca Ceresoli <luca@lucaceresoli.net>2018-07-25 16:35:36 +0200
committerGravatar Thomas Petazzoni <thomas.petazzoni@bootlin.com>2018-07-28 16:32:07 +0200
commite865a1f03c7c68b711a2d754cf8ffa3a168082b2 (patch)
treede7ffef2925ccfbbefdfd35df8515abe3f5c4de4 /board/zynqmp/post-image.sh
parent826981d45ddbb85a92c01869cb2eccc2fb260475 (diff)
uboot: zynqmp: generate SPL image with PMUFW binary
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the boot.bin file together with U-Boot SPL, and the boot ROM will load both. For this to work properly, a patch to U-Boot is needed. However this patch must be applied by each defconfig that wishes to use BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied unconditionally, it would break the build for configs using a U-Boot version higher than 2018.7-rc1 where the patch is already applied. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Joel Carlson <joelsoncarl@gmail.com> Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com> Tested-by: Joel Carlson <JoelsonCarl@gmail.com> [Thomas: - indicate that this feature requires U-Boot 2018.07, since commit c7df098a71e05dc81cee818747759e8060b59626 is needed. - define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU firmware] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Diffstat (limited to 'board/zynqmp/post-image.sh')
0 files changed, 0 insertions, 0 deletions