aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorGravatar Javier Domingo Cansino <javierdo1@gmail.com>2014-06-21 00:28:51 +0200
committerGravatar Thomas Petazzoni <thomas.petazzoni@free-electrons.com>2014-06-22 22:06:15 +0200
commit2b6679baba30ed7b7d54cddd529fdf8b2ffe3d60 (patch)
tree289f8a0e3df681da475e15b02566bcb37004dfb9 /board
parent8d42b6d04516803c4a86c8e02b729d95df9c9415 (diff)
downloadbuildroot-2b6679baba30ed7b7d54cddd529fdf8b2ffe3d60.tar.gz
buildroot-2b6679baba30ed7b7d54cddd529fdf8b2ffe3d60.tar.bz2
board/avnet/zedboard/: improve readme.txt explanations
[Thomas: fix small grammar issue noticed by Spenser Gilliland, adjust commit title.] Signed-off-by: Javier Domingo Cansino <javierdo1@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffstat (limited to 'board')
-rw-r--r--board/avnet/zedboard/readme.txt62
1 files changed, 52 insertions, 10 deletions
diff --git a/board/avnet/zedboard/readme.txt b/board/avnet/zedboard/readme.txt
index efd076f91f..fe8c75ef1f 100644
--- a/board/avnet/zedboard/readme.txt
+++ b/board/avnet/zedboard/readme.txt
@@ -5,26 +5,68 @@ System-On-Chip.
Zedboard information including schematics, reference designs, and manuals are
available from http://www.zedboard.org .
-To boot the Zedboard using a buildroot generated image copy the following files
-to the sdcard:
- zynq-zed.dtb -> devicetree.dtb
- rootfs.cpio.gz.uboot -> uramdisk.image.gz
- uImage -> uImage
- boot.bin -> boot.bin
+The U-Boot firmware for the Xilinx Zynq All Programmable SoC depends
+on some propietary code. This dependency consists of a pair of
+files are available from the Xilinx SDK installation.
-U-Boot SPL Support
--------------
+You will need these files from Xilinx SDK installation to generate
+the U-Boot firmware:
+ ps7_init.c
+ ps7_init.h
+
+Buildroot will create the following files and place them in the
+<output>/images directory.
+ zynq-zed.dtb
+ rootfs.cpio.uboot
+ uImage
+ u-boot.img
+ boot.bin
+
+
+uboot.bin -- U-Boot SPL w/ Xilinx boot.bin wrapper
+---------------------------------------------------
Due to licensing issues, the files ps7_init.c/h are not able to be
distributed with the U-Boot source code. These files are required to make a
boot.bin file.
-If you already have the Xilinx tools installed, the follwing sequence will
+If you already have the Xilinx tools installed, the following sequence will
unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
make zedboard_defconfig
make uboot-patch
cp ${XILINX}/ISE_DS/EDK/sw/lib/hwplatform_templates/zed_hw_platform/ps7_init.{c,h} \
-output/build/uboot-xilinx-v2014.1/boards/xilinx/zynq/
+output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/
+
+After copying these files into the U-Boot source tree, you can
+continue the build with:
+
make
+*Notice*
+While the build will successfully complete without the ps7_init.*
+files, the uboot.bin file generated by this configuration will not
+function properly on the Zedboard. Therefore, it is imperative that
+the ps7_init.* files be copied into the U-Boot source tree any time
+the clean, or uboot-dirclean targets are made.
+
+
+Resulting system
+----------------
+A FAT32 partition should be created at the beggining of the SD Card
+and the following files should be installed:
+ /boot.bin
+ /devicetree.dtb
+ /uImage
+ /uramdisk.image.gz
+ /u-boot.img
+
+
+All needed files can be taken from output/images/
+
+boot.bin, uImage and u-boot.img are direct copies of the same files
+available on output/images/
+
+devicetree.dtb is just zynq-zed.dtb renamed.
+
+uramdisk.image.gz is rootfs.cpio.uboot renamed