diff options
2 files changed, 17 insertions, 2 deletions
diff --git a/board/arm/juno/readme.txt b/board/arm/juno/readme.txt
index 52fabf9b4d..9314bb0eea 100644
--- a/board/arm/juno/readme.txt
+++ b/board/arm/juno/readme.txt
@@ -6,6 +6,7 @@ Intro
These instructions apply to all models of the ARM Juno:
- Juno r0 (does not support PCIe)
- Juno r1 (supports PCIe)
+ - Juno r2 (Big Cluster with A72)
Buildroot will generate the kernel image, device tree blob and a
minimal root filesystem.
@@ -41,6 +42,7 @@ After building, you should obtain this tree:
+-- rootfs.tar
+-- juno.dtb (if Juno r0 is used)
+-- juno-r1.dtb (if Juno r1 is used)
+ +-- juno-r2.dtb (if Juno r2 is used)
+-- Image
Preparing your rootfs
@@ -89,6 +91,19 @@ NOR3LOAD: 00000000 ;Image Load Address
NOR3ENTRY: 00000000 ;Image Entry Point
+Configure *.dtb in the boot configuration for Juno r2
+NOR3ADDRESS: 0x02000000 ;Image Flash Address
+NOR3FILE: \SOFTWARE\juno-r2.dtb ;Image File Name
+NOR3NAME: board.dtb ;Specify target filename to preserve file extension
+NOR3LOAD: 00000000 ;Image Load Address
+NOR3ENTRY: 00000000 ;Image Entry Point
Installing kernel image and DTB
@@ -97,7 +112,7 @@ Installing kernel image and DTB
A mass storage device should appear in your desktop.
3. Open the software/ folder
4. Copy the 'Image' file to software/
-5. Copy the 'juno-r1.dtb' (r1) or the 'juno.dtb' (r0) file to software/
+5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
6. Press the red button in the front pannel of ARM Juno
At this time, the board will erase the Flash entry for each new item and
diff --git a/configs/arm_juno_defconfig b/configs/arm_juno_defconfig
index 87b63741f7..5ce882c841 100644
--- a/configs/arm_juno_defconfig
+++ b/configs/arm_juno_defconfig
@@ -11,4 +11,4 @@ BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux-linaro-4.3-2015.11"
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1 arm/juno-r2"