path: root/configs/pandaboard_defconfig
Commit message (Collapse)AuthorAgeFilesLines
* configs/pandaboard: drop custom post-image scriptGravatar Carlos Santos2019-10-271-1/+2
| | | | | | | | Use support/scripts/genimage.sh, instead, which prevents duplicating TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root. Signed-off-by: Carlos Santos <unixmania@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/pandaboard: needs host-opensslGravatar Thomas Petazzoni2019-08-101-0/+1
| | | | | | | | | | | | | The kernel configuration used by the pandaboard_defconfig needs host-openssl, otherwise it fails to build with: scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/269139222 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* pandaboard_defconfig: bump linux to 4.19.62 to fix build with gcc 8Gravatar Peter Korsgaard2019-07-301-3/+3
| | | | | | | | | | | | The recent change to default to gcc 8 for the internal toolchain broke this defconfig. Fix it by bumping to the latest 4.19 kernel. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/259853955 The kernel now uses ttySx for the omap serial ports, so adjust the getty port to match. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* pandaboard_defconfig: bump u-boot to 2017.05 to fix build with gcc 6Gravatar Peter Korsgaard2017-06-171-1/+1
| | | | | | | | | | | The recent change to default to gcc 6 for the internal toolchain broke this defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6) which was added during the 2016.03 cycle. Fix the build by bumping u-boot to 2017.05. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* linux: use zImage by default on ARMGravatar Thomas Petazzoni2016-04-051-1/+0
| | | | | | | | | | | | | | | | | | | Since quite some time, the kernel and bootloader communities consider zImage as the default format for kernel images on ARM, replacing uImage. The load address information in uImage is no longer needed, since the kernel is position-independent in terms of physical address, except on a few old platforms. For most people, using zImage is simply better/simpler, so let's switch to zImage as the default image format on ARM. All defconfigs are updated: 46 defconfigs no longer need to select explicitly zImage because it's the default, and 16 defconfigs now need to explicitly select uImage because that's no longer the default. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Matt Weber <matt@thewebers.ws> Acked-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: bump kernel to 4.5Gravatar Peter Korsgaard2016-03-151-2/+2
| | | | | | | | | Notice: We cannot move to u-boot 2016.03 without changing the boot setup as 2016.03 broke legacy boot on omap4. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: configure eth0 at startupGravatar Peter Korsgaard2016-03-151-0/+1
| | | | | | | | | Now that we have modules (including usb/net) loaded automatically, we can enable dhcp on eth0. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: use mdev for automatic module loadingGravatar Peter Korsgaard2016-03-151-0/+1
| | | | | | | | | The omap2plus kernel defconfig builds most drivers as modules, so we need (automatic) module loading to be able to use usb/display/.. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: correct genimage dependenciesGravatar Peter Korsgaard2016-03-131-0/+1
| | | | | | | The genimage configuration creates a vfat filesystem, so ensure we have dosfstools / mtools built for the host. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* pandabord: use genimage to generate sdcard imageGravatar Peter Korsgaard2016-02-261-0/+3
| | | | | | And drop the manual sdcard generation description from the readme. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: bump u-boot to 2016.01 and kernel to 4.4.3 and use ext4Gravatar Peter Korsgaard2016-02-261-3/+4
| | | | Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: bump u-boot to 2015.10 and kernel to 4.3Gravatar Sergio Prado2016-02-251-27/+14
| | | | | | | | | | | | VFPv3 and NEON was enabled and a readme.txt file was added. Fixes bug #7580. Tested on Pandaboard ES. [Peter: use EABIhf] Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* defconfigs: all use the headers from the kernelGravatar Yann E. MORIN2016-02-061-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | For most defconfigs, it was trivial to deduce the kernel version, by just reading the version string, which could be: - a standard upstream version string vX.Y.Z - a non-standard version string, but still containg the standard X.Y.Z Those for which it was not so trivial were those hosted on git tree. Since most were already using a custom linux-headers version, it could be easily deduced from that. It was confirmed by browsing said git trees and check the version there. There are a few cases were there was a mismatch: - microzed: uses a 3.18 kernel, but 3.8 headers; fixed. - xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed. - zedboard: uses a 3.18 kernel, but 3.8 headers; fixed. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* pandaboard: remove use of gcc 4.6.xGravatar Vincent2014-07-171-3/+0
| | | | | | | | Gcc 4.6.x is legacy now; remove version specification from the config file to repair the build. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* defconfigs: add the _AT_LEAST_X_Y headers optionsGravatar Yann E. MORIN2014-03-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Since commit 2a5cf5e (check kernel headers version), we also need to specify the series of the custom kernel headers version. The defconfigs file that define such a custom kernel headers version now fail to build. Add the required _AT_LEAST_X_Y options to those config files. Done with this (convoluted but very fast, uch faster ythan manual editing!) rule: for f in $( git grep -l BR2_DEFAULT_KERNEL_VERSION=\"3 ); do grep -E '^BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_' "${f}" >/dev/null && continue sed -r -e '/^(BR2_DEFAULT_KERNEL_VERSION="3\.([[:digit:]]+).*")$/s//\1\nBR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_\2=y/' "${f}" done Only kernels >= 3.0 need those options in the defconfig, since the default for 2.6.x kernels is correct (selects _AT_LEAST_2_6), and the default is not saved in a defconfig. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* pandaboard: fix defconf build with recent kernelsGravatar Thomas Pedersen2013-12-061-3/+13
| | | | | | | | | | | | | | | | | | | | | The patch "pandaboard: Fix defconfig build" locked the default pandaboard kernel to 3.8.11. This is inconvenient, since the boot process has changed since kernel > 3.8. Update the default kernel to 3.12.2 and fix the boot image configuration, but remain compatible with legacy U-Boot versions by using appended flattened device tree uImage. This change *should* keep future kernels compatible with a fixed U-Boot version. Note the default device tree is now for the pandaboard-ES, so users of other board revisions will need to set the correct DTS_NAME. [Peter: use custom kernel headers version (3.12.2)] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* pandaboard: Fix defconfig buildGravatar Maxime Ripard2013-05-061-0/+5
| | | | | | | | | | | | | | | | Commit 75b7dc68 ("linux: default to 3.9, remove 3.8") made 3.9 the default kernel version. The omap kernel switched to multiplatform kernel during the 3.9 kernel development cycle. Obviously, the uImage generation doesn't work anymore with multiplatform kernels, since you have to provide the kernel load address, resulting in a build error. Lock down the kernel version to 3.8 to keep the old behaviour until someone submits a patch to switch to multiplatform kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* configs: add support for PandaBoard and PandaBoard ESGravatar Nicolas Dechesne2012-05-051-0/+26
This is a default configuration for Panda and PandaES, tested on both platforms. DEVTMPFS is enabled, to use static dev configuration one would need to update the generic dev table for ttyO driver. Panda is well supported in mainline kernel with omap2plus_defconfig, so this should be safe. U-boot SPL support is enabled by default as x-loader is now deprecated. With OMAP platforms u-boot,img format is prefered now, so it's enabled by default as well. Also, on PandaBoard, the name of SPL target file is MLO. Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com> Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>